EGX-350 Specifications


Table Size12”(X) x 9.1”(Y) [305 mm x 230 mm]
Max. Cutting Area12”(X) x 9.1”(Y) x 1.6” [305 mm(X) x 230 mm (Y)] x 40mm(Z)
Feed RateX, Y-axis : Up to 2.4 ips (60mm/sec). Z-axis : Up to 1.2 ips (30mm/sec)
Software Resolution0.004” (0.01 mm) /step or 0.001” (0.025 mm ) /step (XY axis only)
Mechanical ResolutionX, Y -axis : 0.0001 in. (0.0025 mm) /step
Spindle MotorBrushless DC motor, max. 50 W
Revolution Speed5,000 to 20,000 rpm
Tool ChuckCutter holder and collet
InterfaceUSB (compliant with Universal Serial Bus Specification Revision 1.1) or serial (RS-232C-compliant)
Instrction SystemRML-1
Power RequirementsAC 100 to 120 V ±10%, 1.3 A, 50/60 Hz (overvoltage category II, IEC 60664-1); or AC 220 to 240 V ±10%, 0.6 A, 50/60 Hz (overvoltage category II, IEC 60664-1)
Acoustic Noise LevelDuring operation: 60 dB (A) or less (when not cutting), During standby: 40 dB(A) or less (as specified by ISO 7779) (According to ISO 7779)
External Dimentions15.5″ (W) x 24.3″ (D) x 23.3″ (H) [393 (W) x 616 (D) x 591 (H) mm] When cover is open: 23.56″ x 21.5″ x 27″ [598 mm (W) x 545 mm (D) x 685 mm]
Weight75 lb. (34 kg)
Operation Temperature41 to 104 °F(5 to 40 °C )
Operation Humidity35 to 80 % (no condensation)
AccessoriesPower cord, depth regulator nose (nose unit), nose-unit retainer (retaining screw, spring), spare mounting screw (for the cutter holder), character cutter (diameter 3.175 mm), flat cutter (diameter 3.175 mm), wrench, solid collet (diameter 3.175 mm), solid collet (diameter 4.36 mm), hexagonal wrench, hexagonal screwdriver, handy panel, adhesive sheet, vacuum adapter for chip cleaning, Roland Software CD-ROM, Roland EngraveStudioTM CD-ROM, Roland Software Program Guide, Roland EngraveStudioTM Program Guide, and User’s Manual
Roland EngraveStudio™ System Requirements
OSWindows VistaTM (32-bit edition), Windows® XP, or Windows® 2000
CPUPentium® III, 1 GHz or faster recommended
RAMWindows Vista: 512 MB or more recommended
Windows XP/2000: 256 MB or more recommended


Stay Connected!

  • This field is for validation purposes and should be left unchanged.