| Gaia II |
GA ll-5106 |
GA ll-5110 |
GA ll-5120 |
| Laser Source |
60 W |
100 W |
200 W |
| Sealed CO2 Laser |
| Cooling |
Air-cooled |
Water-cooled |
| Work Area |
51 x 36 in. (1300 x 916 mm) |
| Max. Part Size(W x L x H) |
All doors closed |
53 x 36 x 2.3 in. (1346 x 914 x 58 mm) |
| All doors open |
53 x ? x 1 in. (1346 x ? x 25 mm) |
| With Honeycomb |
48.8 x 32.2 x 1.0 in. (1240 x 818 x 25 mm) / (With Sink-in Honeycomb Table) |
| Dimensions(W x L x H) |
71.6 x 49.2 x 52.3 in. (1820 x 1250 x 1330 mm) |
| Weight |
420 Kg / 924 lb |
440 Kg / 968 lb |
| Drive |
AC servo Control |
| Maximum Speed* |
30 IPS |
| Throughput (SIPH-Square Inch Per Hour) |
133.2 in 2/hr (859 cm2/hr) |
| Speed Control |
Adjustable from 0.1-100% (Up to 16 color-linked speed settings per job) |
| Power Control |
Adjustable from 0-100% (Up to 16 color-linked power settings per job) |
| Distance Accuracy |
0.254mm or 0.1% of move, whichever is greater |
| Z-Axis Movement |
Manual |
| Focus lens |
Standard 4.0″, optional 2.0″ available |
| Resolution (DPI) |
Available 125, 250, 300, 500, 600, 1000 |
| Computer Interface |
Standard printer port and USB 2.0** port |
| Lens |
Standard 4″ focal lens in enclosed lens carriage (Optional 2″ lens available ) |
| Display PanelDisplay Panel |
4-line LCD panel showing current file name, total working time, laser power, engraving speed, file(s) loaded into memory buffer, setup and diagnostic menus. |
| Safety |
Class 3R for red pointer |
| Cutting Table |
Knife-shaped cutting table with dust collecting tray |
| Facility Requirements |
| Operation Voltage |
AC 220 V / 15 A |
AC 220 V / 20 A |
AC 220 V / 20 A |
| Power Consumption |
3300W |
4400W |
4400W |
| Air Exhaust System |
External exhaust system required to connect to 8-inch opening on machine
Minimum required flow rate: 800m3/h |
| Air Compressor |
Air compressor required |
** File transmission at USB 2.0 Full Speed rate.
Specifications are subject to change without prior notice. |
