Items included in the WAZER machine delivery:
• 1x – User Manual
• 1x – WAZER Main Unit
• 1x – Pump Box
• 1x – WAZER Cut Bed (spare)
• 2x – Abrasive Bucket

Accessory Kit
• 1x – Pump Box Power Cable (with GFCI)
• 1x – WAZER Power Cable (with GFCI)

Setup Kit
• 1x – SD Card
• 1x – Pump Vent Cap
• 1x – Phillips #2 Driver
• 1x – 17mm Wrench
• 2x – Water Sensor
• 1x – Wall Anchor Kit
    – 1x – Wall Mount Bracket
    – 3x – Sheet Rock Anchor
    – 3x – Sheet Rock Fastener
    – 3x – Concrete Wall Anchor
    – 2x – M5x10 Hex Screws
    – 1x – 4 mm Allen Key

Plumbing Kit
• 1x – Garden Hose Adapter
• 1x – Sink Adapter
• 1x – Sink Drain Adapter Kit
• 1x – On/Off Valve
• 8x – #3 Hose Routing Anchors
• 8x – #4 Hose Routing Anchors
• 10x – 6″ Zip-Ties

Spare Parts
• 2x – Fuse
• 1x – Nozzle Height Tool
• 1x – Nozzle Cover
• 1x – Abrasive Hose
• 2x – Abrasive Hose End
• 1x – Orifice
• 2x – Abrasive O-ring
• 12x – 25 mm Fastening Screws
• 12x – 40 mm Fastening Screws
• 1x – Cut Bed Installation Tool
• 2x – Abrasive Plug
• 4x – High-Pressure O-Ring
• 2x – 50 mesh Drain Filters

Hose Kit
• 1x – High-Pressure Hose (sturdy black hose
with metal connectors)
• 1x – Water Inlet Hose (3/8” diameter white
hose)
• 1x – Water Drain Hose (1/2” diameter white
hose)
• Oil Kit

Software
WAM is a robust online platform that takes you from design to cutting fast. Import SVG and DXF files from any major design application. Browser Compatibility: Chrome, Internet Explorer, Safari, Firefox

Optional Leg Stand Kit

Upgrade your WAZER Desktop to a WAZER Standup. The Stand Leg Accessory has anodized aluminum legs and a powder-coated shelf that both match your WAZER. The shelf supports up to 110 lbs. and is perfect for storing abrasive, material and tools. The Pump Box stores efficiently underneath.

Order Now!

Ask Us About Money-Saving Bundles!

Infrastructure Requirements

ELECTRICAL:

The WAZER Main Unit only comes as one model and can be plugged into 110-220VAC power. However, the Pump Unit comes as different models for the specific voltage region they are intended for. This setup guide is for both the 110 VAC 60hz WAZER (pump unit designated as V1.5A) and the 220 VAC 50hz WAZER (pump unit designated as V1.5B). Please ensure you follow the appropriate electrical hookup instructions below given your model of WAZER. You can verify your model by looking at the serial number tags on your Pump Unit.

• 110 VAC 60hz (V1.5A): This version of WAZER has its Main Unit consume up to 2amps and its Pump Unit consume up to 15 amps. Given traditional 110 VAC 60hz household and shop circuits you will be required to have one of the following for your machine:
  • • 2x 15amp circuits (common household shop application)
    • 1x 20amp circuit (common industrial and shop application)
• 220 VAC 50hz (V1.5B): This version of WAZER has its Main Unit consume up to 1 amp and its Pump Unit consume up to 10 amps. Any circuit >11amps will be sufficient.
• As is usually the case with high load motors, there is an inherent “in-rush current” that will momentarily exceed the stated steady-state run currents above for a fraction of a second. The time associated with this “in-rush current” is very short and almost all household and commercial AC breakers are designed to handle this safely without tripping. However, in the rare case that you run into trouble with your breaker tripping you may need to consult an electrician to have your system checked to handle on the order of 60amps for 150 milliseconds.

WATER SUPPLY:

Some areas are susceptible to dirty water or water main breaks. Please be sure to include a mechanical prefilter before the inlet to the pump to ensure water supply contaminants don’t go into the pump. We cannot be held accountable for damage caused to pump as a result of contaminated water supply.

• Flow Rate: Greater than 1gpm (3.8L/min). Most household and commercial water plumbing will meet this requirement. Typical bathroom faucets 1-3 gpm, kitchen faucets 2-4 gpm, and outdoor/shop hoses 3-6 gpm.
• Pressure: 35-125psi (0.24MPa – 0.8MPa). Most household and commercial water plumbing systems fall in this range. The higher in that range, the better for the Pump Box in terms of its longevity.
• Temperature: 130°F (54°C). DO NOT use a hot water line for WAZER. Water Hardness: Less than 180 mg/L (10.5 gpg).
• Water hardness is the biggest factor that affects the longevity of the components. Most municipal water in North America is below this figure, however we suggest you give your region a search if this is a concern.
• WAZER should not be used in noisy electromagnetic environments. Some appropriate environments include laboratories, household workshops, and most machine shops. Heavy industrial environments that contain machinery or devices that induce electromagnetic interference on other adjacent devices (either on the same circuit or in the general proximtiy) should be avoided.

WATER DRAINAGE:

Make sure that it does not take more than 30 feet (9m) of your Water Drain Hose to go from WAZER to the drain. Additionally, the drain location should be less than 4 feet (12mm) above WAZER.

DESKTOP:

• Sturdy and capable of holding over 400 lbs. (160kg)
• Flat and level under load. The levelness is key for correct operation of WAZER. Maximum 1.5mm of height difference across entire cutting bed.
• A clear area of 46” by 27” (1.2m by 0.7m) to allow for access.
• Does not deteriorate when exposed to water. Because under some unforeseen scenarios, water may stream out from abrasive hopper and other places.
  • • • Good choices: quartz, stainless steel, treated solid wood
      • Poor choices: plywood, unfinished MDF or particle board
• NOTE: No desktop is necessary if you plan on using WAZER with the Stand Leg Accessory. However, please keep a 62” area above the floor footprint that you intend to place your WAZER on in order to allow access to it.
• Floorspace: The Pump Box is intended to be placed on the floor and requires 30” x 26” (0.8m x 0.7m) of space to allow for adequate airflow, cables, and hoses.

AMBIENT AIR TEMPERATURE:                                                                                                                                                                                                                                      

40 – 100 F / 5 – 40 C WAZER should never be operated outside of this range.

SPACE AROUND WAZER: 

Make sure to leave at least 12” (0.4m) of free space on the right and left sides of WAZER. On the left side of WAZER, you will need room to refill the Abrasive Hopper. On the right side, you may need access to the Control Panel.

WET AREA:

WAZER operates with abrasive and water. Though WAZER is enclosed, it is not a sealed system, and water and abrasive will inevitably leak on occasion. The floor surface should be water- resistant, slip proof and smooth enough for easy cleanup of spills. A nearby floor drain is also recommended. Water may stream out from under your abrasive hopper as an example of why this machine needs to be in a water tolerant area.

PROXIMITY TO ABRASIVE STORAGE:

Abrasive is heavy. If you will be cutting often make sure that the WAZER location is close to a storage area for Abrasive and Used Abrasive. Moving abrasive long distances can quickly become cumbersome.

NOISE:

WAZER emits noise that would be disruptive in settings such as classrooms and offices. Make sure to place WAZER in a location where the noise level of traditional shop tools like drills and saws is acceptable.